Is it better for the bigger capacity of uv laser marking machine?

    The UV marking machine is a more intelligent device in the society, and the price will be more expensive than other marking machines. The main reason is that the marking effect is good and the light spot produced is relatively small; fine marking can be carried out according to the material, and the original material will not be damaged in general; and it is energy-saving and environmentally friendly, and the scope of use is also very wide; small size, does not occupy space ; does not consume resources, etc.

    The UV laser marking machine can realize the marking function on both metal materials and non-metal materials. It has three main powers: 3 watts, 5 watts and 10 watts. Relatively speaking, the higher power has the higher price. This also indirectly shows that the higher power will have the better marking effect.

    The greater power will have the wider range of use, so there is an obvious answer here. If the budget is sufficient, it is recommended to use a 5-watt device. Alrough the 3-watt device has relatively high scalability, but the power is still low; on the contrary, the 10-watt device price is relatively expensive. If you are just starting your business, I really don't recommend buying such an expensive one.

    But the higher power has the higher cost of the machine and the higher power consumption. So if you can get satisfactory results with a 3-watt machine, there is no need to buy a 5-watt machine. Unless you really need a very fine marking effect, or the material is difficult to mark, then you need to buy a device with a higher power.